Mercedes-Benz R-Class 2007 COMAND Manual - Manual (Page 50)

48
Audio
Radio operation
Preset station selection via number
keypad
FM- and AM-Bands
̈ Press one of the number keys, such as
2 briefly.
The radio will tune to the frequency as-
signed to that memory location. If none
has been set by you, the radio will not
change the station.
Automatic station scan (FM, AM)
The stations on the same band (FM, AM)
can be scanned one after the other for 8
seconds each.
Start scan function
̈ Activate the desired wave band
(
୴ page 44).
̈ Press the Scan soft key.
The scan function will begin.
End scan function and play a station
̈ Press the Scan soft key again if you
hear the desired station.
or
The scan function stops automatically
when the first station received has been
scanned twice.
i
FM and AM presets are independent
and can only be accessed while in the
corresponding band.
Saving stations for FM and AM
(
୴ page 49).
i
In the AM band, two search runs take
place. During the first run, stations with
good reception are played. During the
second run, stations with weaker
reception are played.