Mercedes-Benz R-Class 2007 COMAND Manual - Manual (Page 48)

46
Audio
Radio operation
Automatic seek tuning
Via memory presets
FM- and AM-Bands
̈ Press g or h.
or
̈ Push the joystick to g or G.
The radio will tune to the frequency
assigned to the next memory location.
If none has been set by you, the radio
will not change the station.
Via frequency
̈ Press g or h.
or
̈ Push the joystick to g or G.
The radio will tune to the next
receivable station (FM, AM) or channel
(WB) of descending/ascending
frequency depending on the direction
of seek.
WB direct channel selection
̈ Press a number key 1 through 7.
Manual tuning (FM, AM)
̈ Activate the desired wave band
(
୴ page 44).
̈ Press g or h longer than 2 se-
conds.
The function rapidly scans the
frequencies.
̈ Press g or h repeatedly to
change the frequency step by step.
i
Memory must be activated in the Audio
search function menu, which ap-
pears in the multifunction display.
Access this menu from the
Settings... menu via the Vehicle
submenu ( ୴ page 30). For additional
information refer to seperate Operator’s
Manual instructions.
i
Frequenc. must be activated in the
Audio search function menu,
which appears in the multifunction
display.
Access this menu from the
Settings... menu via the Vehicle
submenu ( ୴ page 30). For additional
information refer to seperate Operator’s
Manual instructions.
i
The selected channel is not shown in
the status line.