Mercedes-Benz CL-Class 2007 User Manual
Page 561
558
Operation
Vehicle care
Headlamps, tail lamps, side markers,
turn signal lenses
̈
Use a mild car wash detergent, such as
Mercedes-Benz approved Car
Shampoo, with plenty of water.
Cleaning the DISTRONIC Plus*/
PRE-SAFE
®
Brake* system sensors
The sensors are integrated in the front
bumpers and cannot be seen from the
outside.
1 Sensor cover
2 Bumper area near sensors
̈
Switch off the ignition (
̈
Use a mild car wash detergent, such as
Mercedes-Benz approved Car
Shampoo, with plenty of water and a
non-scratching cloth to clean sensor
cover
1.
̈
Clean a wide area of the bumpers
surrounding the sensors
2.
̈
Restart the engine after cleaning sen-
sors.
!
Only use window cleaning solutions that are
suitable for plastic lamp lenses. Window clean-
ing solutions which are not suitable may damage
the plastic lamp lenses of the headlamps. There-
fore, do not use abrasives, solvents or cleaners
that contain solvents.
Never apply strong force and only use a soft,
non-scratching cloth when cleaning the lenses.
Do not attempt to wipe dirty lenses with a dry
cloth or sponge.
Otherwise you may scratch or damage the lens
surface.
!
To prevent scratches or damage, never
apply strong force and only use a soft,
non-scratching cloth when cleaning the sensor
cover and/or bumper area near sensors. Do not
attempt to wipe dirty sensors and/or bumper
with a dry cloth or sponge.