Mercedes-Benz E-Class 2008 COMAND Manual - Manual (Page 138)

138
Navigation*
During route guidance
̈ In the Info menu ( ୴ page 136), press
the Route soft key.
The route appears on the map.
̈ Press the List soft key.
The list of road/route sections remain-
ing appears. The road currently trav-
elled on appears at the top.
̈ Use or to scroll through the
list. The
Page soft keys allow scrolling
through the list page by page.
The Detour function blocks a route seg-
ment ahead.
The length of this route segment can be
entered. The system then calculates a de-
tour route, if possible.
̈ Show the soft key displays
(
୴ page 136).
The Detour soft key display indicates
whether the Detour function is active.
= not active
= active
Detour function is not active
You can activate the function and set the
length of a route segment to be blocked
(
୴ page 138).
Detour function is already active
You can change the length of the route
segment to be blocked (
୴ page 139), or
switch off the Detour function by deleting
the detour (
୴ page 139).
Activating detour function and setting
length of route segment to be blocked
̈ Show the soft key displays
(
୴ page 136).
̈ Press the Detour soft key.
The system gives you a full-screen map
and freezes the map and screen show-
ing the position of the vehicle. You can
now set the distance of the route seg-
ment to be blocked.
Displaying the route list i
Depending on the distance to the des-
tination, it may take a few moments be-
fore the route list is completed.
The list is completed only when the
route calculation is completed.
Dest.
is displayed before the last list entry.
Detour function