beautypg.com

Route guidance with gps, Route guidance after vehicle transport, Trip interruption during route guidance – Mercedes-Benz E-Class 2008 COMAND Manual User Manual

Page 106: Route guidance with gps route guidance after, Vehicle transport trip interruption during, Route guidance

background image

106

Navigation*

Important notes

T

If your vehicle has been transported by a
car, train or ferry, COMAND may require
some time to find its exact position.

COMAND may issue navigation announce-
ments not suited to your actual position.

Moving the vehicle a few yards is typically
enough to remedy the situation.

While determining the exact position ,
route guidance is subject to the following
restrictions:

ț

COMAND does not output navigation
announcements.

ț

The display

OFF

ROAD

and an arrow indi-

cating the direction of the destination
appear instead of the detailed naviga-
tion displays.

Once the system is correctly repositioned,
route guidance continues with navigation
announcements and detailed navigation
displays.

The following instructions have to be fol-
lowed when interrupting a trip during route
guidance, and later continuation:

ț

Continuation of the trip within 2 hours
after interruption:

The system automatically resumes
route guidance.

ț

Continuation of the trip between
2 and 12 hours after interruption:

̈

Continue route guidance manually
in the Navigation main menu
(

page 108).

Route guidance with GPS

i

GPS (Global Positioning System) sig-
nals received make it possible to deter-
mine the current vehicle position.

i

Deviations from the actual position
may occur

ț

if the reception of GPS signals is
disturbed e. g. in parking garages
and tunnels

ț

if road conditions are bad

ț

depending on the vehicle’s condi-
tion

Route guidance after vehicle trans-
port

i

The navigation DVD must be loaded in
the navigation computer (

page 105).

Trip interruption during route guid-
ance

i

Trip interruption means parking the ve-
hicle and switching COMAND OFF.

Trip continuation means trip continua-
tion with COMAND switched ON.

This manual is related to the following products: