Mercedes-Benz GL-Class 2008 Owners Manual - Manual (Page 541)

540
Practical hints
Towing the vehicle
̈ Remove the KEYLESS-GO* start/stop
button from the starter switch
(
୴ page 43).
̈ Insert the SmartKey with
KEYLESS-GO* into the starter switch.
̈ Switch on the ignition.
̈ Depress the brake pedal.
̈ Shift the automatic transmission to
neutral position N.
̈ Release the brake pedal.
̈ If engaged, release the parking brake
(
୴ page 59).
̈ Switch off the ignition and leave the
SmartKey with KEYLESS-GO* in the
starter switch.
Installing towing eye bolt
Depending on whether you are towing a
vehicle or you are being towed, the towing
eye bolt can be screwed into threaded
holes which are located behind covers on
the right-hand side of each bumper.
1 Cover
! Towing of the vehicle should only be done
using the properly installed towing eye bolt.
Never attach a tow cable, tow rope or tow rod to
the vehicle chassis, frame or suspension parts.
i To signal turns while being towed with
hazard warning flasher in use, set the starter
switch to position 2 and activate combination
switch for left or right turn signal in usual manner
– only the selected turn signal will operate.
Upon canceling the turn signal, the hazard warn-
ing flasher will operate again.
୴୴
164.boo Seite 540 Freitag, 30. März 2007 12:54 12