Mercedes-Benz GL-Class 2008 Owners Manual User Manual
Page 310
309
Controls in detail
Loading
Returning seats to their original position
Step 1:
̈
Return third-row seats to its original
position (
Step 2:
1 Seat backrest
2 Lever
̈
Pull and hold lever
2 in direction of
arrow at resistance point.
̈
Fold seat backrest
1 rearward until it
engages.
̈
Check for secure locking by pushing
and pulling on seat backrest
1.
3 Seat cushion
̈
Fold seat cushion
3 rearward until it
locks into position.
Warning!
G
Make sure all seats are properly locked in
position before driving off. Do not drive with
seats not properly locked.
Never ride in a moving vehicle with the seat
not properly locked as this can be danger-
ous. The seat could move forward and the
seat backrest could fold. You could slide un-
der the seat belt during braking, vehicle ma-
neuvers, or in an accident. If you slide under
it, the belt would apply force at the abdomen
or neck. That could cause serious or even fa-
tal injuries.
The seat backrest and seat belt provide the
best restraint when the wearer is in a nearly
upright position and the belt is properly po-
sitioned on the body.
164.boo Seite 309 Freitag, 30. März 2007 12:54 12