beautypg.com

397 operation – Mercedes-Benz GL-Class 2008 Owners Manual User Manual

Page 398

background image

397

Operation

Tires and wheels

Restarting the Run Flat Indicator

The Run flat indicator must be restarted in
the following situations:

ț

If you have changed the tire inflation
pressure

ț

If you have replaced the wheels or tires

ț

If you have installed new wheels or
tires

̈

Using the Tire and Loading Information
placard on the driver’s door B-pillar or,
if available, the tire inflation pressure
label on the inside of the fuel filler flap,
make sure the tire inflation pressure of
all four tires is correct.

̈

Switch on the ignition (

page 42).

Make sure the standard display menu
appears in the multifunction display
(

page 155).

̈

Press button

k or j repeatedly

until the following message appears in
the multifunction display:

̈

Press the reset button on the instru-
ment cluster (

page 152).

The following message will appear in
the multifunction display:

Restart
Run Flat Indicator?
Yes
Cancel

Warning!

G

The Run Flat Indicator does not provide a

warning for wrongly selected tire inflation

pressures. Always adjust tire inflation pres-

sure according to the Tire and Loading

Information placard on the driver’s door

B-pillar (

page 388) or, if available, on the

tire inflation pressure label located on the

inside of the fuel filler flap (

page 374).

The Run Flat Indicator does not replace

regular checks of the tire inflation pressures

since a gradual pressure loss in more than

one tire cannot be detected by the Run Flat

Indicator.

The Run Flat Indicator is not able to issue a

warning due to a sudden dramatic loss of

tire inflation pressure (e.g. tire blowout

caused by a foreign object). In this case

bring the vehicle to a halt by carefully apply-

ing the brakes and avoiding abrupt steering

maneuvers.

Warning!

G

The Run Flat Indicator can only warn you in

a reliable manner if you have set the correct

tire inflation pressures for each tire.

If an incorrect tire inflation pressure was set,

the system will monitor the pressure ac-

cording to the incorrect value.

164.boo Seite 397 Freitag, 30. März 2007 12:54 12