Check if the vehicle jack, Practical hints – Mercedes-Benz M-Class 2009 Owners Manual User Manual
Page 303
Where will I find ...?
301
1
Tilt the plates upward
2
Fold the lower plate outward
3
Insert the plate
X
Setting up: Tilt both plates upward
1
.
X
Fold the lower plate outward
2
.
X
Guide the tabs of the lower plate all the way
into the openings of base plate
3
.
For information on where to place wheel
chocks when changing a wheel, see “Lifting
the vehicle” (
Jack
Only use the jack supplied with your vehicle
to lift the vehicle briefly for wheel changes.
If you use the jack for any other purpose,
you or others could be injured, as the jack
is designed only for the purpose of
changing a wheel.
When using the jack, observe the safety
notes in the “Mounting the spare wheel”
section and the notes on the jack.
X
Take the jack from the vehicle tool kit
(
Storage position
X
Take the reversible ratchet from the vehicle
tool kit.
Operational position
1
Jack
2
Reversible ratchet
X
Attach reversible ratchet
2
to jack
1
in
such a way that the word
UP can be seen.
Before placing the jack back into the vehicle
tool kit:
X
Fully collapse the jack (storage position).
X
Remove the reversible ratchet.
Practical hints
Z