Recalling positions from memory, Lighting, Notes – Mercedes-Benz M-Class 2009 Owners Manual User Manual
Page 111: Exterior lamp switch, Controls in detail

Lighting
109
X
Press and hold desired memory position
button
1, 2 or 3 until the seat has
completely moved to the stored position.
On the driver’s side, also wait for the
steering wheel and exterior rear view
mirrors to move to the stored position.
i
Releasing the memory position button
stops movement to the stored positions
immediately.
Lighting
i
If you drive in countries where vehicles
drive on the other side of the road than the
country where the vehicle is registered, you
must have the headlamps modified for
symmetrical low beams. Relevant
information can be obtained at any
authorized Mercedes-Benz Center.
i
Vehicles equipped with active Bi-Xenon
headlamps:
The active Bi-Xenon headlamps monitor the
vehicle’s steering angle and speed, then
automatically shift their beams to either
side to better follow the curvature of the
road ahead, increasing usable illumination
over conventional headlamps.
$
a
Standing lamps, left
%
g
Standing lamps, right
& M
Off
Daytime running lamp mode
( U
Automatic headlamp mode
Daytime running lamp mode
) C
Parking lamps (also tail lamps,
license plate lamps, side marker
lamps and instrument panel lamps)
* B
Low-beam headlamps or high-beam
headlamps
, ¥
Front fog lamps
. †
Rear fog lamp
i
The exterior lamps go out automatically
when you remove the SmartKey from the
Controls in detail
Z