Mercedes-Benz SLK-Class 2013 Owners Manual - Manual (Page 206)

Switching the additional speedometer on
or off
Only vehicles with manual transmission have
this function.
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X Press the : or 9 button to select the
Instr. Cluster submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Speedometer [mph]: function.
You will see the selected setting: On or
Off .
X Press the a button to save the setting.
i Speed is displayed in mph.
The Speedometer [mph] function allows you
to choose whether the status area in the
multifunction display always shows the speed
in mph instead of the outside temperature.
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X Press the : or 9 button to select the
Instr. Cluster submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Permanent Display: function.
You will see the selected setting Outside
Temperature or Speedometer [km/h]
(USA)/ Speedometer [mph] (Canada).
X Press the a button to save the setting.
i The speed is shown in km/h (USA)/mph
(Canada).
Lights
Setting the daytime running lamps
i This function is not available in Canada.
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X
Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
X Press : or 9 to select the Daytime
Running Lights: function.
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 107).
Switching Adaptive Highbeam Assist on/
off
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X
Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Adaptive Highbeam Assist: function.
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
For further information about Adaptive
Highbeam Assist, see (
Y
page 111).
Setting the brightness of the ambient
lighting
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
X Press : or 9 to select the Ambient
Light Brightness: function.
You will see the selected setting.
X Press a to confirm.
204
Menus and submenus
On-boar
d
comput
er
and
displa
ys