beautypg.com

Driving and parking, Driving systems – Mercedes-Benz SLK-Class 2013 Owners Manual User Manual

Page 179

background image

The braking effect of the HOLD function is

canceled and the vehicle could roll away if:

R

the HOLD function is deactivated by

depressing the accelerator pedal or the

brake pedal.

R

there is a malfunction in the system or an

interruption in the power supply, e.g.

battery failure.

R

the electrical system in the engine

compartment, the battery or the fuses are

tampered with.

R

the battery is disconnected.

If you leave the vehicle or park it, deactivate

the HOLD function and secure the vehicle

against rolling away.

General notes

The HOLD function can assist the driver in the

following situations:

R

when pulling away, especially on steep

slopes

R

when maneuvering on steep slopes

R

when waiting in traffic

The vehicle is kept stationary without the

driver having to depress the brake pedal.
The braking effect is canceled and the HOLD

function deactivated when you depress the

accelerator pedal to pull away.

Activation conditions

You can activate the HOLD function if:

R

the vehicle is stationary.

R

the engine is running or if it has been

automatically switched off by the ECO

start/stop function.

R

the driver's door is closed or your seat belt

is fastened.

R

the hood is closed.

R

the electric parking brake is released.

R

the selector lever is in position D, R or N on

vehicles with automatic transmission.

R

DISTRONIC PLUS is deactivated.

Activating the HOLD function

X

Make sure that the activation conditions

are met.

X

Depress the brake pedal.

X

Quickly depress the brake pedal further

until :

HOLD

appears in the multifunction

display.

The HOLD function is activated. You can

release the brake pedal.

i

If depressing the brake pedal the first

time does not activate the HOLD function,

wait briefly and then try again.

Deactivating the HOLD function

The HOLD function is deactivated

automatically if:

R

you accelerate. On vehicles with automatic

transmission: only when the transmission

is in position D or R.

R

you shift the transmission to position P on

vehicles with automatic transmission.

R

you apply the brakes again with a certain

amount of pressure until

HOLD

disappears

from the multifunction display.

R

you secure the vehicle using the electric

parking brake.

R

you activate DISTRONIC PLUS.

i

After a time, the electric parking brake

secures the vehicle and relieves the service

brake.

Driving systems

177

Driving

and

parking

Z