beautypg.com

Driving and parking, Driving systems – Mercedes-Benz SLK-Class 2013 Owners Manual User Manual

Page 174

background image

Storing the current speed or calling up the

last stored speed

G

WARNING

The set speed stored in memory should only

be set again if prevailing road conditions and

legal speed limits permit. Possible

acceleration or deceleration differences

arising from returning to the preset speed

could cause an accident and/or serious injury

to you and others.

X

Briefly pull the cruise control lever toward

you =.

X

Remove your foot from the accelerator

pedal.

DISTRONIC PLUS is activated. The first

time it is activated, the current speed is

stored. Otherwise, it sets the vehicle cruise

speed to the previously stored value.

Setting a speed

G

WARNING

Keep in mind that it may take a brief moment

until the vehicle has made the necessary

adjustments.
Increase or decrease the set vehicle speed to

a value that the prevailing road conditions and

legal speed limits permit. Otherwise, sudden

and unexpected acceleration or deceleration

of the vehicle could cause an accident and/

or serious injury to you and others.

X

To adjust the set speed in 1 mph

increments (1 km/h increments): briefly

press the cruise control lever up : to the

pressure point for a higher speed or

down ? for a lower speed.

Every time the cruise control lever is

pressed up or down, the last speed stored

is increased or reduced.

X

To adjust the set speed in 5 mph

increments (10 km/h increments):

briefly press the cruise control lever

up : past the pressure point for a higher

speed or down ? for a lower speed.

Every time the cruise control lever is

pressed up or down, the last speed stored

is increased or reduced.

Setting the specified minimum distance

G

WARNING

It is up to the driver to exercise discretion to

select the appropriate setting given road

conditions, traffic, driver's preferred driving

style and applicable laws and driving

recommendations for safe following distance.

Cruise control lever

X

To increase: turn control = toward ;.

DISTRONIC PLUS then maintains a greater

distance between your vehicle and the

vehicle in front.

X

To decrease: turn control = toward :.

DISTRONIC PLUS then maintains a shorter

distance between your vehicle and the

vehicle in front.

You can set the specified minimum distance

for DISTRONIC PLUS by varying the time span

between one and two seconds. With this

function, you can set the minimum distance

that DISTRONIC PLUS keeps to the vehicle in

front, dependent on vehicle speed. You can

see this distance in the multifunction display

(

Y

page 173).

Make sure that you maintain a sufficiently

safe distance from the vehicle in front. Adjust

the distance to the vehicle in front if

necessary.

172

Driving systems

Driving

and

parking