beautypg.com

Opening and closing, Side windows – Mercedes-Benz M-Class 2013 Owners Manual User Manual

Page 96

background image

Vehicles with KEYLESS-GO:

R

Release the sensor surfaces on the exterior

door handle to interrupt the closing

procedure.

R

To open, pull the same door handle

immediately and hold it firmly. The door

windows and the sliding sunroof will open

for as long as the door handle is held but

the door is not opened.

i

Notes on the automatic reversing feature

for:

R

the side window (

Y

page 92)

R

the sliding sunroof (

Y

page 96)

Using the SmartKey

The SmartKey must be close to the driver's

door handle.

X

Point the tip of the SmartKey at the driver's

door handle.

X

Press and hold the & button until the

side windows and the sliding sunroof or the

panorama roof with power tilt/sliding

panel are fully closed.

X

Make sure that all the side windows and the

sliding sunroof or panorama roof with

power tilt/sliding panel are closed.

On vehicles with a panorama roof with power

tilt/sliding panel:

X

Press and hold the & button again until

the roller sunblinds of the panorama roof

with power tilt/sliding panel close.

X

To interrupt convenience closing:

release the & button.

Using KEYLESS-GO

The KEYLESS-GO key must be outside the

vehicle. All the doors must be closed.

X

Touch recessed sensor surface : on the

door handle until the side windows and the

sliding sunroof or the panorama roof with

power tilt/sliding panel are fully closed.

i

Make sure you only touch recessed

sensor surface :.

X

Make sure that all the side windows and the

sliding sunroof or panorama roof with

power tilt/sliding panel are closed.

On vehicles with a panorama roof with power

tilt/sliding panel:

X

Touch recessed sensor surface : on the

door handle again until the roller sunblinds

of the panorama roof with power tilt/

sliding panel close.

X

To interrupt convenience closing:

release recessed sensor surface : on the

door handle.

Resetting the side windows

If a side window can no longer be closed fully,

you must reset it.

X

Close all the doors.

X

Turn the SmartKey to position 1 or 2 in the

ignition lock.

X

Pull the corresponding switch on the door

control panel until the side window is

completely closed. (

Y

page 92)

X

Hold the switch for an additional second.

94

Side windows

Opening

and

closing