Mercedes-Benz M-Class 2013 Owners Manual - Manual (Page 417)

Tire labeling
Overview
: Uniform Tire Quality Grading Standard
(
Y
page 419)
; DOT, Tire Identification Number
(
Y
page 418)
= Maximum tire load (
Y
page 417)
? Maximum tire pressure (
Y
page 404)
A Manufacturer
B Tire material (
Y
page 418)
C Tire size designation, load-bearing
capacity and speed index (
Y
page 415)
D Load index (
Y
page 417)
E Tire name
The markings described above are on the tire
in addition to the tire name (sales
designation) and the manufacturer's name.
i Tire data is vehicle-specific and may
deviate from the data in the example.
Tire size designation, load-bearing
capacity and speed rating
G WARNING
Exceeding the stated tire load-bearing
capacity and the approved maximum speed
could lead to tire damage or the tire bursting.
There is a risk of accident.
Therefore, only use tire types and sizes
approved for your vehicle model. Observe the
tire load rating and speed rating required for
your vehicle.
: Tire width
; Nominal aspect ratio in %
= Tire code
? Rim diameter
A Load bearing index
B Speed rating
General: depending on the manufacturer's
standards, the size imprinted in the tire wall
may not contain any letters or may contain
one letter that precedes the size description.
If there is no letter preceding the size
description (as shown above): these are
passenger vehicle tires according to
European manufacturing standards.
If "P" precedes the size description: these are
passenger vehicle tires according to U.S.
manufacturing standards.
If "LT" precedes the size description: these
are light truck tires according to U.S.
manufacturing standards.
If "T" precedes the size description: these are
compact emergency spare wheels at high tire
pressure, to be used only temporarily in an
emergency.
Tire width: tire width : shows the nominal
tire width in millimeters.
Height-width ratio: aspect ratio ; is the
size ratio between the tire height and tire
width and is shown as a percentage. The
All about wheels and tires
415
Wheels
and
tires
Z