beautypg.com

Driving and parking, Driving systems – Mercedes-Benz M-Class 2013 Owners Manual User Manual

Page 194

background image

i

The special off-road ABS setting enables

a precise, brief and repeated locking of the

front wheels. This causes them to dig into

loose earth. Be aware that the front wheels

easily skid across the ground surface if

completely braked and therefore lose their

ability to steer.

Driving systems

Cruise control

Important safety notes

If you fail to adapt your driving style, cruise

control can neither reduce the risk of an

accident nor override the laws of physics.

Cruise control cannot take into account the

road, traffic and weather conditions. Cruise

control is only an aid. You are responsible for

the distance to the vehicle in front, for vehicle

speed, for braking in good time and for

staying in your lane.
Do not use cruise control:

R

in road and traffic conditions which do not

allow you to maintain a constant speed e.g.

in heavy traffic or on winding roads

R

on slippery road surfaces. Braking or

accelerating could cause the drive wheels

to lose traction and the vehicle could then

skid

R

when there is poor visibility, e.g. due to fog,

heavy rain or snow

If there is a change of drivers, advise the new

driver of the speed stored.

General notes

Cruise control maintains a constant road

speed for you. It brakes automatically in order

to avoid exceeding the set speed. On long and

steep downhill gradients, especially if the

vehicle is laden or towing a trailer, you must

select shift range 1, 2 or 3 in good time. By

doing so, you will make use of the braking

effect of the engine, which relieves the load

on the brake system and prevents the brakes

from overheating and wearing too quickly.
Use cruise control only if road and traffic

conditions make it appropriate to maintain a

steady speed for a prolonged period. You can

store any road speed above 20 mph

(30 km/h).

i

Cruise control should not be activated

during off-road driving.

Cruise control lever

:

To activate or increase speed

;

To activate or reduce speed

=

To deactivate cruise control

?

To activate at the current speed/last

stored speed

When you activate cruise control, the stored

speed is shown in the multifunction display

for five seconds. In the multifunction display,

the segments between the stored speed and

the maximum speed light up.

Activation conditions

To activate cruise control, all of the following

activation conditions must be fulfilled:

R

the electric parking brake must be

released.

R

you are driving faster than 20mph

(30 km/h).

R

ESP

®

must be active, but not intervening.

R

the transmission must be in position D.

192

Driving systems

Driving

and

parking