beautypg.com

Techn ical data, Service products and filling capacities – Mercedes-Benz CLA-Class 2014 Owners Manual User Manual

Page 354

background image

Windshield washer system

Important safety notes

G

WARNING

Windshield washer concentrate is highly flam-

mable. If it comes into contact with hot engine

components or the exhaust system it could

ignite. There is a risk of fire and injury.
Make sure that no windshield washer con-

centrate is spilled next to the filler neck.

!

Do not add distilled or de-ionized water to

the washer fluid container. Otherwise, the

level sensor may be damaged.

!

Only MB SummerFit and MB WinterFit

washer fluid should be mixed together. The

spray nozzles may otherwise become

blocked.

Comply with the important safety notes for

service products when handling washer fluid

(

Y

page 347).

At temperatures above freezing:

X

Fill the washer fluid reservoir with a mixture

of water and windshield washer fluid, e.g.

MB SummerFit.

Add 1 part MB SummerFit to 100 parts water.
At temperatures below freezing:

X

Fill the washer fluid reservoir with a mixture

of water and washer fluid, e.g. MB Winter-

Fit.

Adapt the mixing ratio to the outside temper-

ature.

R

Down to 14 ‡ (Ò10 †): mix 1 part MB Win-

terFit to 2 parts water.

R

Down to Т4 ‡ (Т20 †): mix 1 part MB Win-

terFit to 1 part water.

R

Down to Т20.2 ‡ (Т29 †): mix 2 parts MB

WinterFit to 1 part water.

i

Add windshield washer fluid, e.g. MB

SummerFit or MB WinterFit, to the washer

fluid all year round.

Climate control system refrigerant

Important safety notes

The climate control system of your vehicle is

filled with refrigerant R‑134a.
The instruction label regarding the refrigerant

type used can be found on the left, on the

underside of the hood.

!

Only the refrigerant R‑134a and the PAG

oil approved by Mercedes-Benz may be

used. The approved PAG oil may not be

mixed with any other PAG oil that is not

approved for R-134a refrigerant. Other-

wise, the climate control system may be

damaged.

Service work, such as topping-up refrigerant

or replacing components, may only be carried

out by a qualified specialist workshop. All

applicable regulations must be adhered to,

SAE standard J639 included.
Always have work on the climate control sys-

tem carried out at a qualified specialist work-

shop.

Refrigerant instruction label

Example: refrigerant instruction label
:

Warning symbol

;

Refrigerant filling capacity

=

Applicable standards

?

PAG oil part number

A

Type of refrigerant

352

Service products and filling capacities

Techn

ical

data