beautypg.com

Breakd own assist ance, Flat tire – Mercedes-Benz CLA-Class 2014 Owners Manual User Manual

Page 301

background image

Using the TIREFIT kit

TIREFIT sticker, 2-part

X

Do not remove any foreign objects which

have penetrated the tire, e.g. screws or

nails.

X

Remove the tire sealant bottle, the accom-

panying TIREFIT sticker and the tire infla-

tion compressor from the stowage well

underneath the cargo compartment floor

(

Y

page 296).

X

Affix part : of the TIREFIT sticker within

the driver's field of vision.

X

Affix part ; of the TIREFIT sticker near the

valve on the wheel with the defective tire.

X

Remove filler hose B and plug = from the

bottom section of the tire inflation com-

pressor housing.

X

Slide the yellow filler hose connector into

the mounting on yellow cap A of tire seal-

ant bottle : until the plug engages.

X

With the sealing rings in front, slide yellow

cap A of tire sealant bottle : into the

mounting of tire inflation compressor ;

until the cap and both hooks engage.

X

Remove the cap from valve C on the faulty

tire.

X

Screw filler hose D onto valve.

X

Insert plug = into the socket of the ciga-

rette lighter (

Y

page 265) or into a 12 V

power socket in your vehicle (

Y

page 265).

X

Turn the SmartKey to position 1 in the igni-

tion lock (

Y

page 141).

X

Press on/off switch ? on the tire inflation

compressor to ON.

The tire inflation compressor is switched

on. The tire is inflated.

i

First, tire sealant is pumped into the tire.

The pressure can briefly rise to approx-

imately 500 kPa (5 bar/73 psi).
Do not switch off the tire inflation com-

pressor during this phase.

X

Let the tire inflation compressor run for a

maximum of ten minutes. The tire should

then have attained a pressure of at least

200 kPa (2.0 bar/29 psi).

!

Do not operate the tire inflation compres-

sor for longer than ten minutes at a time

without a break. It may otherwise overheat.
The tire inflation compressor can be oper-

ated again once it has cooled down.

If a tire pressure of 200 kPa (2.0 bar/29 psi)

is achieved after a maximum of ten minutes,

see (

Y

page 300).

Flat tire

299

Breakd

own

assist

ance

Z