On-board comput er and display s, Menus and submenus – Mercedes-Benz CLA-Class 2014 Owners Manual User Manual
Page 210

X
Press the : or 9 button to select the
Speedometer [km/h]
Speedometer [km/h]
or
Speedometer
Speedometer
[mph]
[mph]
function.
You will see the selected setting:
on
on
or
off
off
.
X
Press the a button to save the setting.
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X
Press the = or ; button on the steer-
ing wheel to select the
Sett
Sett
menu.
X
Press the : or 9 button to select the
Instrument Cluster
Instrument Cluster
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display
Permanent Display
function.
You will see the selected setting
Outside
Outside
Temperature
Temperature
or
Speedometer [km/h]
Speedometer [km/h]
/
Speedometer [mph]
Speedometer [mph]
.
X
Press the a button to save the setting.
Lights
Switching the daytime running lamps on/
off
Canada only: daytime running lamps are
required by law. You cannot set the
Daytime
Daytime
Running Lights
Running Lights
function via the on-board
computer.
X
Press the = or ; button on the steer-
ing wheel to select the
Sett
Sett
menu.
X
Press the : or 9 button to select the
Light
Light
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Daytime Running Lights
Daytime Running Lights
function.
If the
Daytime Running Lights
Daytime Running Lights
function
has been switched on, the cone of light and
the W symbol in the multifunction dis-
play are shown in orange.
X
Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 109).
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the steer-
ing wheel to select the
Sett
Sett
menu.
X
Press the : or 9 button to select the
Light
Light
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Amb. Light +/-
Amb. Light +/-
function.
You will see the selected setting.
X
Change the setting with a.
X
Press the : or 9 button to adjust the
brightness to a level from
Off
Off
to
Level 5
Level 5
(bright).
X
Press the a or % button to save the
setting.
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
off
If you have activated the
Surround Light‐
Surround Light‐
ing
ing
function and the light switch is set to
Ã, the following functions are activated
when it is dark:
R
surround lighting: the exterior lighting
remains lit for 40 seconds after unlocking
with the key. If you start the engine, the
surround lighting is switched off and auto-
matic headlamp mode is activated
(
Y
page 109).
R
exterior lighting delayed switch-off: the
exterior lighting remains lit for 60 seconds
after the engine is switched off. If you close
all the doors and the trunk lid, the exterior
lighting goes off after 15 seconds.
X
Press the = or ; button on the steer-
ing wheel to select the
Sett
Sett
menu.
X
Press the : or 9 button to select the
Light
Light
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Surround Lighting
Surround Lighting
function.
When the
Surround Lighting
Surround Lighting
function is
activated, the light cone and the area
208
Menus and submenus
On-board
comput
er
and
display
s