beautypg.com

Driv ing and parking, Driving – Mercedes-Benz CLA-Class 2014 Owners Manual User Manual

Page 144

background image

the engine compartment or in the exhaust

system.

!

Do not depress the accelerator when

starting the engine.

i

During a cold start, the engine runs at

higher speeds to enable the catalytic con-

verter to reach its operating temperature.

The sound of the engine may change during

this time.

Automatic transmission

X

Shift the transmission to position P.

Transmission position display P is shown in

the multifunction display.

i

When the transmission is in position N,

you can also start the engine with the brake

pedal depressed.

Starting procedure

X

Turn the SmartKey to position 3 in the igni-

tion lock (

Y

page 141) and release it as

soon as the engine is running.

Pulling away

Automatic transmission

i

It is only possible to shift the transmission

from position P to the desired position if

you depress the brake pedal. Only then can

the parking lock be deactivated. If you do

not depress the brake pedal, the DIRECT

SELECT lever can still be moved but the

parking lock remains engaged.

i

At transmission fluid temperatures below

Т4 ‡ (Т20 †), you can only shift out of park

position P into another transmission posi-

tion when the engine is running.

X

Depress the brake pedal and keep it

depressed.

X

Shift the transmission to position D or R.

X

Release the brake pedal.

X

Carefully depress the accelerator pedal.

The electric parking brake is automatically

released (

Y

page 158).

The red F (USA only) or ! (Canada

only) indicator lamp in the instrument clus-

ter goes out.

i

The vehicle locks centrally once you have

pulled away. The locking knobs in the doors

drop down.
You can open the doors from the inside at

any time.
You can also deactivate the automatic lock-

ing feature (

Y

page 209).

i

Upshifts take place at higher engine

speeds after a cold start. This helps the

catalytic converter to reach its operating

temperature more quickly.

Hill start assist

Hill start assist helps you when pulling away

forwards or in reverse on an uphill gradient. It

holds the vehicle for a short time after you

have removed your foot from the brake pedal.

This gives you enough time to move your foot

from the brake pedal to the accelerator pedal

and to depress it before the vehicle begins to

roll.

G

WARNING

After a short time, hill start assist will no lon-

ger brake your vehicle and it could roll away.

There is a risk of an accident and injury.
Therefore, quickly move your foot from the

brake pedal to the accelerator pedal. Never

leave the vehicle when it is held by hill start

assist.

X

Remove your foot from the brake pedal.

The vehicle is then held for about a second.

X

Pull away.

142

Driving

Driv

ing

and

parking