Whe el s and tire s, Loading the vehicle – Mercedes-Benz C-Coupe 2015 Owners Manual User Manual

Page 314

the currently set tire pressures as the refer-

ence values for monitoring. In most cases, the

tire pressure monitor will automatically

detect the new reference values after you

have changed the tire pressure. However, you

can also define reference values manually as

described here. The tire pressure monitor

then monitors the new tire pressure values.

Set the tire pressure to the value recom-

mended for the corresponding driving sit-

uation on the Tire and Loading Information

placard on the driver's side

B-pillar (

page 306).

Additional tire pressure values for different

loads can also be found on the tire pressure

table on the inside of the fuel filler flap

(

page 306).

Make sure that the tire pressure is correct

on all four wheels.

Make sure that the SmartKey is in position

2 in the ignition lock.

Press the = or ; button on the steer-

ing wheel to select the

Service

menu.

Press the 9 or : button to select

Tire Pressure

Press the a button.

The multifunction display shows the cur-

rent tire pressure for the individual tires or

the

Tire pressures will be dis‐

played after driving a few minutes

message.

Press the : button.

The

Use Current Pressures as New

Reference Values

message appears in

the multifunction display.

If you wish to confirm the restart:

Press the a button.

The

Tire Press. Monitor Restarted

message appears in the multifunction dis-

play.
After driving for a few minutes, the system

checks whether the current tire pressures

are within the specified range. The new tire

pressures are then accepted as reference

values and monitored.

If you wish to cancel the restart:

Press the % button.

The tire pressure values stored at the last

restart will continue to be monitored.

Radio type approval for the tire pres-

sure monitor

Country Radio type approval number
USA

FCC ID: MRXMW2433A
FCC ID: MRXGG4
FCC ID: MRXMC34MA4

Canada

IC: 2546A-MW2433A
IC: 2546A-GG4
IC: 2546A-MC34MA4

Loading the vehicle

Instruction labels for tires and loads

WARNING

Overloaded tires can overheat, causing a

blowout. Overloaded tires can also impair the

steering and driving characteristics and lead

to brake failure. There is a risk of accident.
Observe the load rating of the tires. The load

rating must be at least half of the GAWR of

your vehicle. Never overload the tires by

exceeding the maximum load.

Two instruction labels on your vehicle show

the maximum possible load.
(1) The Tire and Loading Information placard

is on the B-pillar on the driver's side. The

Tire and Loading Information placard

shows the maximum permissible number

of occupants and the maximum permis-

sible vehicle load. It also contains details

of the tire sizes and corresponding pres-

sures for tires mounted at the factory.

(2) The vehicle identification plate is on the

B-pillar on the driver's side. The vehicle

identification plate informs you of the

gross vehicle weight rating. It is made up

312

Loading the vehicle

Whe

and

tire