Mercedes-Benz C-Coupe 2015 Owners Manual - Manual (Page 235)

Display messages Possible causes/consequences and M M Solutions
Â
Key Not Detected Key Not Detected
(white display mes-
sage)
The KEYLESS-GO key cannot be detected at present.
X
Change the location of the SmartKey with the KEYLESS-GO
functions in the vehicle.
If the KEYLESS-GO key is still not detected:
X
Operate the vehicle with the SmartKey in the ignition lock.
Â
Remove Remove 'Start' 'Start' But‐ But‐
ton and Insert Key ton and Insert Key
The KEYLESS-GO key can continuously not be detected.
KEYLESS-GO is temporarily malfunctioning or is defective. A warn-
ing tone also sounds.
X Insert the SmartKey into the ignition lock and turn it to the
desired position.
X
Visit a qualified specialist workshop.
Warning and indicator lamps in the instrument cluster
Seat belts
Problem Possible causes/consequences and M M Solutions
ü
After starting the
engine, the red seat
belt warning lamp lights
up for 6 seconds.
The seat belt warning lamp reminds the driver and front passenger
to fasten their seat belts.
X Fasten your seat belt (
Y
page 55).
ü
After starting the
engine, the red seat
belt warning lamp lights
up. In addition, a warn-
ing tone sounds for up
to 6 seconds.
The driver's seat belt is not fastened.
X
Fasten your seat belt (
Y
page 55).
The warning tone ceases.
ü
The red seat belt warn-
ing lamp lights up after
the engine starts, as
soon as the driver's or
the front-passenger
door is closed.
The driver or front passenger has not fastened their seat belt.
X Fasten your seat belt (
Y
page 55).
The warning lamp goes out.
There are objects on the front-passenger seat.
X
Remove the objects from the front-passenger seat and stow
them in a secure place.
The warning lamp goes out.
Warning and indicator lamps in the instrument cluster
233
On
-bo
ard
com
pu
te
ran
d
dis
pla
ys
Z