On-board computer and displays – Mercedes-Benz C-Coupe 2015 Owners Manual User Manual
Page 238
![background image](/manuals/638478/238/background.png)
Problem
Possible causes/consequences and M
M Solutions
!
The yellow ABS warning
lamp is lit while the
engine is running.
ABS is temporarily unavailable. BAS, BAS PLUS, ESP
®
, EBD (elec-
tronic brake force distribution), PRE‑SAFE
®
, PRE‑SAFE
®
Brake, the
HOLD function, hill start assist are therefore also deactivated, for
example.
Possible causes are:
R
Self-diagnosis is not yet complete.
R
The on-board voltage may be insufficient.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The front and rear wheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely affec-
ted. The braking distance in an emergency braking situation can
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is a risk of an accident.
X
Carefully drive a suitable distance, making slight steering move-
ments at a speed above 12 mph (20 km/h).
The functions mentioned above are available again when the
warning lamp goes out.
If the warning lamp is still on:
X
Observe the additional display messages in the multifunction
display.
X
Drive on carefully.
X
Visit a qualified specialist workshop.
236
Warning and indicator lamps in the instrument cluster
On-board
computer
and
displays