Kontron KTA55-pITX - Manual (Page 12)

KTD-S0043-A Page 9 Graphics Interface
KTA55/pITX Software Guide
Power Sequencing 1 T5
Power Sequencing 1 T6
Power Sequencing 2 T4
4.3.2 LCD Panel Selection
The choice of an LCD display is basically defined by two parameters.
Parameter Value
Pixel per Clock (Channels) 1 or 2
DisplayPort Interface
Currently this leads to a maximum resolution of
1920 x 1200 Pixel
With the AMD ® graphic driver it is not guaranteed that every resolution can be achieved. KONTRON does not
guarantee the correct function of the board for untypical resolution. In principal the use of DisplayID TM
allows realizing every special display resolution. For this a valid DisplayID TM dataset must be written to the
EEPROM of the DP/LVDS Monitor Controller.
Many displays with a resolution up to XGA (1024 x 768) have a digital (TTL) interface. KONTRON offers a
special adapter to connect these displays to the LVDS interface (KAB-ADAPT-LVDStoTTL with part number
61029).