Kontron CP3-SVE-P200DC-24V - Manual (Page 8)

Page 8
PD14: CP3-SVE-P200DC-24V CPCI Power Supply
RID 24139 PD14, Rev.02
2.4 Electrical Specifications
INPUT
OUTPUT
REGULATION
PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS
Input Voltage - DC Continuous input range. 18 36 VDC
Hold-up Time From 24 VDC input None ms
Input Current At full rated load A
Input Protection Non-user serviceable, internally-located input line fuse.
Inrush Surge Current Internally limited by thermistor and electronic switch. 20 A
Operating Frequency Switching frequency of main output transformer. 125 145 kHz
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Efficiency Full rated load, 24 VDC input >= 83 %
Minimum Load; V1,
V2, V3 Minimum load required to maintain regulation with no
load on V4 None A
Minimum Load, V3 Minimum load on V3 required to maintain regulation on V4 None A
Ripple and Noise Full load, 20 MHz bandwidth See Regulation table
Output Power 250 LFM forced-air cooling (ca. 1.3 m/s) 200 W
Overshoot /
Undershoot Output voltage overshoot / undershoot at turn-on 0 %
Regulation Varies by output. Total regulation includes: line changes
over the specified input range, changes in load starting at
50% load and changing to 100% load See Regulation table
Turn-on Delay Time required for initial output voltage stabilization 1 sec
Initial Setting Accuracy ±1 %
OUTPUT
VOLTAGE
ADJUSTMENT
RANGE
OUTPUT
CURRENT
LINE
REGULATION
LOAD
REGULATION
RIPPLE & NOISE
pk-pk
V1 +5V N/A 25A 0.5% 1% < 60 mV
PP
V2 +3.3V N/A 36A 0.5% 1% < 60 mV
PP
V3 +12V N/A 3A 0.5% 1% < 120 mV
PP
V4 -12V N/A 0.5A 0.5% 1% < 120 mV
PP