Kontron CPCI Generic backplane - Manual (Page 29)

CPCI Backplane General
ID 24229, Rev. 01 © 2002 PEP Modular Computers GmbH Page 15
5. Product Documentation Organization
The product documentation organization for PEP’s CPCI Power Supplies is as follows:
1. CPCI Backplane Manual (ID: 24229)
2. CPCI Backplane Product Documentation Guide (ID: 24229, Sub-ID: PDG)
3. Specific PEP CPCI Backplane Product Documentation (ID: 24229, Sub-ID: PDnn)
Item 1 above is represented by this manual which provides generic information about PEP’s
CPCI backplanes. Item 2 is enclosed with this manual for referencing to applicable CPCI Back-
plane Product Documentation. Item 3 represents the individual product documentation for spe-
cific backplanes. For each backplane addressed in item 2 there is a separate document
available.
Each of the above items are maintained independently of one another, whereby item 2 always
reflects the current status of available product documentation.
6. Applied Standards
The PEP Modular Computers' CompactPCI backplanes comply where applicable with the
requirements of the following standards.
6.1 CE Compliance
• Emission EN50081-1, EN 55011/EN 55022
• Immission EN50082-2, EN 61000-4
• Electrical Safety EN60950, VDE 0100, VDE 0805
6.2 Other Safety Standards
• UL, CSA, DVE, NEMKO
6.3 Mechanical Compliance
• Mechanical Dimensions IEEE 1101.10
6.4 Environmental Tests
• Vibration/Broad-Band IEC68-2-6
• Random Vibration IEC68-2-64 (3U boards)
• Permanent Shock IEC68-2-29
• Single Shock IEC68-2-27
7. Related Publications
7.1 CompactPCI Systems/Boards
• CompactPCI Specification, V. 2.0, Rev. 2.1
• DIN 41612
• ATX Specification
• CompactPCI Power Interface Specification, 2.11 R1.0