Kontron CPCI Generic backplane - Manual (Page 28)

General CPCI Backplane
Page 14 © 2002 PEP Modular Computers GmbH ID 24229, Rev. 01
4. PEP CompactPCI Standard Backplanes
* System slot on all backplanes on the right.
** 8 6U slots or down to 1 6U slot in combination with up to 14 3U slots.
* System slot on all backplanes on the right.
** 8 6U slots or down to 1 6U slot in combination with up to 14 3U slots.
Table 7: PEP CompactPCI Standard Backplane Family
Form Factor Slots* Power Supply Connector Backplane
3U
4
Faston plugs/M4 Screw-Type CP3-BP4
DIN M-Series CP3-BP4-M
6 ATX CP3-BP6-ATX
8
DIN M-Series CP3-BP8-M
DIN M-Series CP3-BP8-RIO
11 DIN M-Series CP3-BP11-M
6U
8 DIN M-Series CP6-BP8-STD
8/15** DIN M-Series CP6-BP8-DUALPCI
8 DIN M-Series CP6-BP8-H110
Table 8: PEP CompactPCI Standard Backplanes – Mechanical Characteristics
Backplane Special Features Size Weight
CP3-BP4
— 80.3*128.7 mm 170g
CP3-BP4-M — 100.7*128.7 mm 165g
CP3-BP6-ATX Rear I/O connectivity 120.7*128.7 mm 270g
CP3-BP8-M
Rear I/O connectivity 197.1*128.7 mm 400g
CP3-BP8-RIO
Rear I/O connectivity 197.1*128.7 mm 440g
CP3-BP11-M Rear I/O connectivity 283.0*128.7 mm 700g
CP6-BP8-STD
Rear I/O connectivity,
hot-swap capability
222.5*262.0 mm 1,000g
CP6-BP8-DUALPCI
Dual PCI,
hot-swap capability
222.5*262.0 mm 960g
CP6-BP8-H110 H.110 222.5*262.0 mm 980g