Kontron CPCI Generic backplane - Manual (Page 23)

CPCI Backplane General
ID 24229, Rev. 01 © 2002 PEP Modular Computers GmbH Page 9
Table 5: DIN M24/8 Connector Pinouts (6U Backplanes)
Pin
Function
Pin
Function
Lower
Connector
Upper
Connector
Lower
Connector
Upper
Connector
2 L1 N/C B.16 +3.3VL +3.3VL
5 N N/C B.17 +3.3VL +3.3VL
8 N/C N/C B.18 +3.3VL +3.3VL
11 PE N/C B.19 N/C +12VL
A.13 N/C N/C B.20 N/C -12VL
A.14 INH N/C C.13 EN N/C
A.15 N/C N/C C.14 DEG N/C
A.16 N/C N/C C.15 INT N/C
A.17 N/C N/C C.16 +3.3VL +3.3VL
A.18 +3.3VL +3.3VL C.17 +3.3VL +3.3VL
A.19 N/C +12VL C.18 +3.3VL +3.3VL
A.20 N/C -12VL C.19 N/C +12VL
B.13 +3.3VL +3.3VL C.20 N/C -12VL
B.14 +3.3VL +3.3VL 22 N/C +5VL
B.15 +3.3VL +3.3VF 25 OVL OVL
L1 = live connection, N = neutral, PE = earth protection; INT = internally connected; N/C = not connected.
Warning!
To ensure correct 5V operation of your equipment it is necessary to
connect 5VL to 5VF and 0VL to 0VF.
The maximum voltage compensation is 0.25V per line.