Kontron ETX-CD - Manual (Page 84)

ETX®-CD / BIOS Operation
CPU Thermal Control
Feature Option Description
Thermal Control Circuit Disabled
TM1
TM2
TM1 and TM2
Sets the mode of the Thermal Control Circuit
PROCHOT# Enable Enabled
Disabled
This function engages the Thermal Control Circuit when
enabled
DTS Enable Enabled
Disabled
Controls the DTS function of the processor
Active Trip Point Disabled
15 C
23 C
…
55 C
63 C
…
119 C
This value controls the temperature of the ACPI active
trip point - the point in which the OS will turn on the
CPU fan (connector on PCB). If DTS is enabled only
values below 97°C are valid.
Passive Cooling Trip Point Disabled
15 C
23 C
…
119 C
This value controls the temperature of the ACPI passive
cooling trip point - the point in which the OS will start
to throttle the CPU, either by TM1 or TM2. If DTS is
enabled only values below 97°C are valid.
Critical Trip Point POR
15 C
23 C
…
119 C
127 C
This value controls the temperature of the ACPI critical
trip point - the point in which the OS will shut down the
system.
POR means 100°C for all Intel processors.
84