Kontron ETX-CD - Manual (Page 49)

ETX®-CD / ETX® Connectors
6.5.2 Connector X3 Signal Description
VGA Output
LVDS Flat Panel Interface (JILI)
The user interface for flat panels is the JUMPtec Intelligent LVDS Interface (JILI). The implementation of this subsystem
complies with the ETX® Specification. Implementation information is provided in the ETX® Design Guide. Refer to the
documentation for additional information.
Digital Flat Panel Interface (JIDI)
The ETX®-CD does not support the JUMPtec Intelligent Digital Interface (JIDI).
Serial Ports (1 and 2)
The ETX®-CD supports two serial interfaces (TTL). You can use COM2 for IrDA SIR operation. This feature is implemented in
the super I/O device, which is a Winbond 83627HF. The implementation of the serial interface complies with the ETX®
Specification. Implementation information is provided in the ETX® Design Guide. Refer to the documentation for
additional information.
Configuration:
The serial-communication interface uses I/O and IRQ resources. The resources are allocated by the BIOS during POST
configuration and are set to be compatible with common PC/AT settings. Use the BIOS setup to change some parameters
that relate to the serial-communication interface.
PS/2 Keyboard
The implementation of the keyboard interface complies with the ETX® Specification. Implementation information is
provided in the ETX® Design Guide. Refer to the documentation for additional information.
Configuration:
The keyboard uses I/O and IRQ resources. The BIOS allocates the resources during POST configuration. The resources are
set to be compatible with common PC/AT settings. Use the BIOS setup to change some keyboard-related parameters.
PS/2 Mouse
The implementation of the mouse interface complies with the ETX® Specification. Implementation information is
provided in the ETX® Design Guide. Refer to the documentation for additional information.
Configuration:
The mouse uses I/O and IRQ resources. The BIOS allocates the resources during POST configuration. The resources are set
to be compatible with common PC/AT settings. You can change some mouse-related parameters from the BIOS setup.
IrDA
The ETX®-CD is capable of IrDA SIR operation. This feature is implemented in the Winbond 83627HF. Contact Kontron
Embedded Systems for help with this feature.
Parallel Port
The parallel-communication interface shares signals with the floppy-disk interface. The implementation of this parallel
port complies with the ETX® Specification. Implementation information is provided in the ETX® Design Guide. Refer to
the documentation for additional information.
Configuration:
49