4 electrical specification, 1 supply voltage, 2 power supply rise time – Kontron SMARC-sXBTi User Manual
Page 14: 3 supply voltage ripple, 4 power consumption, Electrical specification, Supply voltage, Power supply rise time, Supply voltage ripple, Power consumption
SMARC-sXBTi / Product Specification
3.4
Electrical Specification
3.4.1
Supply Voltage
Following supply voltage is specified at the SMARC™ connector:
VCC:
3,0V - 5,25V
RTC:
2.5V - 3.3V
3.4.2
Power Supply Rise Time
» The input voltages shall rise from ≤10% of nominal to within the regulation ranges within 0.1ms to 20ms.
» There must be a smooth and continuous ramp of each DC input voltage from 10% to 90% of its final set-point
3.4.3
Supply Voltage Ripple
» Maximum 100 mV peak to peak 0 – 20 MHz
3.4.4
Power Consumption
The maximum Power Consumption of the different SMARC-sXBTi variants is tbd (100% CPU load on all cores; 90°C CPU
temperature). Further information with detailed measurements are available in Application Note KEMAP054 available on
Information there is available after registration.
14