Kontron COMe-cPC2 - Manual (Page 74)

COMe-cPC2 / BIOS Operation
IDE Configuration
Feature Option Description
SATA #1 Configurationer Disabled
Enabled Enables or disables the IDE interface of US15W SCH.
This concerns the onboard SSD and PATA2SATA Bridge
Configure SATA#1 as IDE Compatible
RAID
AHCI
IDE Enhanced
Selects the mode for SATA#1 controller
SATA#2 Configuration Disabled
Enhanced
Controls the mode for the 2nd SATA controller in ICH-9
Hard Disk Write Protect Disabled
Enabled
Disables/enables device write protection. It will be
effective only if device is accessed through BIOS
functions.
IDE Detect Time Out (Sec.) [0-35] 1 Selects the time out value for the detection of ATA/
ATAPI devices
ATA(PI) 80Pin Cable Detection Host & Device
Host
Device
Selects the mechanism for detecting 80Pin ATA(PI)
cables.
IDE Device Submenu
Feature Option Description
Type Not Installed
Auto
CD/DVD
ARMD
Selects the type of the IDE Devices connected to the
system
LBA/Large Mode Disabled
Auto Disables the LBA mode or enables it, when a device
supports it
Block (Multi-Sector Transfer) Disabled
Auto Disabled: The data transfer from and to the device
occurs one sector ata atime
Auto: The data transfer from and to the device occurs
multiple sectors at a time if the device supports ist
PIO Mode Auto
0
1
2
3
4
(Auto) Configures the PIO Mode
DMA Mode Auto
SWDMAn
MWDMAn
UDMAn
SWDMA: Single Word DMA
MWDMA: Multi Word DMA
UDMA: Ultra DMA
S.M.A.R.T. Auto
Enabled
Disabled
Disables, Enables or automatically enables the
S.M.A.R.T feature (Self-Monitoring, Analysis and
Reporting Technology)
32Bit Data Transfer Enabled
Disabled
Disables and Enables the 32Bit Data Transfer Mode
74