Kontron COMe-cPC2 - Manual (Page 13)

COMe-cPC2 / Product Specification
Storage
onboard SSD -
SD Card support -
IDE Interface JMD330 SATA#3 to PATA
Serial-ATA 3x SATA 3Gb/s
SATA AHCI NCQ, HotPlug, Staggered Spinup, eSATA, PortMultiplier
SATA RAID 0, 1
Connectivity
USB 8x USB 2.0
USB Client -
PCI PCI Rev 2.3 (33MHz/3.3V)
PCI External Masters 4
PCI Express 5x PCIe x1 Gen1
Max PCI Express 6x PCIe x1 without LAN
PCI Express x2/x4 configuration YES
Ethernet 10/100/1000 Mbit
Ethernet controller Intel® 82567 (Boazman)
It is also possible to run the 1st 4 x1 lanes as 1 x4 lane. For that please pull-up the signal A33 and A29 to 3.3V on the
baseboard.
Express Card hotplug functionality is only available, when in BIOS setup the PCIexpress
lane is switched from [AUTO] to [ENABLED]
Ethernet
The Intel® 82567 (Boazman) ethernet supports:
» Jumbo Frames
» MACsec IEEE 802.1 AE
» WOL (Wake On LAN)
» PXE (Preboot eXecution Environment)
Misc Interfaces and Features
Audio HD Audio
Onboard Hardware Monitor ON Semi ADT7475
Trusted Platform Module iTPM 1.2 (integrated in ICH9M)
Miscellaneous -
Kontron Features
External I2C Bus Fast I2C
M.A.R.S. support YES
Embedded API JIDA16 / JIDA32 / PICMG EAPI
Custom BIOS Settings / Flash Backup YES
Watchdog support Single Staged
Power Features
Singly Supply Support YES
Supply Voltage 8.5V - 18V
ACPI ACPI 3.0
S-States S0, S3, S4, S5
S5 Eco Mode YES
Misc Power Management DPST 4.3
13