To create a bios with custom defaults, Flash your bios with custom defaults – Kontron COMe-cPC2 User Manual
Page 38

COMe-cPC2 / Features and Interfaces
To create a BIOS with custom defaults:
» Change your BIOS settings
» Save as custom defaults to RTC/Flash and Exit (module will now always start with these settings)
Flash Backup should show “Enter new Password” first time saving custom defaults. If it is
not possible to set a new password or entering a password shows an error message, please
clean up CMOS data with DOS command:
jidacmos rtc /clean (jidacmos utility is available
at Kontron’s Customer Section)
» Extract the BIOS including custom defaults with afudos or kflash utility for windows
Tool
Command
AFUDOS
c:\>afudos.exe biosname.rom /O
KFLASH
c:\>kflash.exe backup biosname.rom
Flash your BIOS with custom defaults:
To flash a BIOS with customized defaults extracted like described above, use following options
Operating System
Command
Windows OS
c:\>kflash.exe flash biosname.rom /bncr
DOS
c:\>afudos.exe biosname.rom /p /b /n /c
c:\>jidacmos.exe eep /clean
kflash.exe is a shell tool included in Kontron K-Station System Utility Package.
jidacmos utility is included in the BIOS download packages at Kontron's customer section.
38