Kontron COMe-mBT10 - Manual (Page 55)

COMe-mBT10 / BIOS Operation
7.3 POST Codes
Important POST codes during boot-up
8B Booted to DOS
68 Booted to Setup / EFI Shell
00 Booted to Windows
7.4 Setup Guide
The Setup Utility changes system behavior by modifying the Firmware configuration. The setup program uses a number of
menus to make changes and turn features on or off.
Functional keystrokes in POST:
[F2] Enter Setup
[F5] Boot Menu
[ESC] + [2] Enter Setup via Remote Keyboard in Console Redirection Mode (depending on console Settings F2 may not be supported)
Functional keystrokes in Setup:
[F1] Help
[F9] Load default settings
[F10] Save and Exit
Menu Bar
The menu bar at the top of the window lists different menus. Use the left/right arrow keys to make a selection.
Legend Bar
Use the keys listed in the legend bar on the bottom to make your selections or exit the current menu. The table below
describes the legend keys and their alternates.
Key Function
or Arrow key ← → Select a menu.
or Arrow key ↑ ↓ Select fields in current menu.
or Move cursor to top or bottom of current window.
or Move cursor to next or previous page.
+/- or F5/F6 Change Option
Execute command or select submenu.
Selecting an Item
Use the or key to move the cursor to the field you want. Then use the + and – keys to select a value for that field. The ↑ ↓
Save Value commands in the Exit menu save the values displayed in all the menus.
Displaying Submenus
Use the or key to move the cursor to the submenu you want. Then press . A pointer ( ) marks all submenus. ← → ►
Item Specific Help Window
The Help window on the right side of each menu displays the Help text for the selected item. It updates as you move the
cursor to each field.
General Help Window
Pressing on a menu brings up the General Help window that describes the legend keys and their alternates. Press
to exit the General Help window.
55