Kontron COMe Ref. Carrier T2 - Manual (Page 35)

COM Express™ miniBaseboard Type 2 / Connectors and Features
30
5.5 IDE and Compact Flash
COM Express™ Type2 pin-out defines one PATA channel using up to 2 devices. On ETXexpress® miniBaseboard a Socket
for CF-Cards (J14) is usable as IDE Master Device if Master/Slave configuration Jumper J15 is closed. For a second IDE
device a 44pin header (J4) is available. On COM Express™ miniBaseboard Type 2 the PATA interface is available on a
standard 40pin IDE connector J4.
D69 shows IDE/CF/SATA HDD activity which is also available for a front panel Status LED on connector J17.
Pin CF-Card Socket J14 44pin IDE pin header J4 40pin IDE connector J4
1 GND IDE_Reset# IDE_Reset#
2 D03 GND GND
3 D04 D7 D7
4 D05 D8 D8
5 D05 D6 D6
6 D07 D9 D9
7 #CS0 D5 D5
8 GND D10 D10
9 #ATA_SEL D4 D4
10 GND D11 D11
11 GND D3 D3