Kontron COMe-bSC2 - Manual (Page 89)

COMe-bSC2 / BIOS Operation
Thermal Configuration
Feature Options Description
Critical Trip Point POR
15°C
…
119°C
This value controls the temperature of the ACPI Critical
Trip Point - the point in which the OS will shut the
system off. Note: 100°C is the Plan Of Record (POR) for
all Intel mobile processors
ActTPnt Low Temp Disabled
15°C
..
55°C
…
95°C
This value controls the temperature of the ACPI Active
Trip Point - the point in which the OS will turn the
processor fan on Active Trip Point Low Fan Speed.
ActTPoint Low Fan Speed 70 Active Trip Point Low Fan Speed in percentage. Value
must be between 33% - 100%. This is the speed at
which fan will run when Active Trip Point Low is crossed.
Active Trip Point High Disabled
15°C
…
79°C
…
95°C
This value controls the temperature of the ACPI Active
High Trip Point - the point in which the OS will turn the
processor fan on Active Trip Point High Fan Speed.
Passive Trip Point Disabled
15°C
…
95°C
…
119°C
This value controls the temperature of the ACPI Passive
Trip Point - the point in which the OS will begin
throttling the processor
- Passive TC1 Value 1 This value sets the TC1 value for the ACPI Passive
Cooling Formula. Range 1 - 16
- Passive TC2 Value 5 This value sets the TC2 value for the ACPI Passive
Cooling Formula. Range 1 - 16
- Passive TSP Value 10 This item sets the TSP value for the ACPI Passive Cooling
Formula. It represents in tenth of a second how often
the OS will read the temperature when passive cooling
is enabled. Range 2 - 32
89