Kontron COMe-bHL6 - Manual (Page 96)

COMe-bHL6 / BIOS Operation
Memory Configuration
Feature Options Description
Memory Frequency Limiter Auto
2067
1333
1600
1867
2133
2400
2667
Select the memory frequency in MHz
Max TOLUD Dynamic
1 GB … 3.25GB
Maximum Value of TOLUD. Dynamic assignment would
adjust TOLUD automatically based on largest MMIO
length of installed graphic controller. Manual TOLUD
setting from 1GB to 3.25GB in 0.25GB steps
NMode Support Auto
1N Mode
2N Mode
Select the memory supported Command Rate (N-Mode)
Channel A DIMM Control Enabled
Disabled
Enables or disables DIMMs on channel A
Channel B DIMM Control Enabled
Disabled
Enables or disables DIMMs on channel B
Memory Remap Enabled
Disabled
Enable/Disable Memory Remap above 4GB
MRC FastBoot Enabled
Disabled
Enable/Disable MRC FastBoot. Generally, this option
only takes effect when doing cold boots/resets
DIMM Profile Default DIMM profile
XMP profile 1
XMP Profile 2
Select Intel Extreme Memory Profile XMP if supported
by DIMM SPD
96