Kontron COMe-bHL6 - Manual (Page 79)

COMe-bHL6 / BIOS Operation
Boot Features
Feature Options Description
NumLock On
Off
Selects Power-on state for NumLock
Timeout 1 Number of seconds that P.O.S.T will wait for the user
input before booting
CSM Support Yes
No
Enables or Disables the UEFI CSM (Compatibility
Support Module)to support legacy PC boot process.
Both legacy and UEFI boots are feasible
Quick Boot Disabled
Enabled
Enable or Disable Quick Boot
Dark Boot Disabled
Enabled
Enable or Disable Dark Boot
Diagnostic Splash Screen Disabled
Enabled
Enable or Disable the Diagnostic Splash Screen
Diagnostic Summary Screen Disabled
Enabled
Display the Diagnostic Summary Screen during boot
BIOS Level USB Enabled
Disabled
Enable/Disable all BIOS support for USB in order to
reduce boot time. Note that this will prevent using a
USB keyboard in setup or a USB biometric scanner such
as a fingerprint reader to control access to setup, but
does not prevent the operating system from supporting
such hardware
USB Legacy Enabled
Disabled
Enable/Disable USB BIOS SMM support for mouse,
keyboard, mass storage, etc, in legacy operating
systems such as DOS
Console Redirection Disabled
Enabled
Enable/Disable Universal Console Redirection
- Console Port All
Onboard COM1
Onboard COM2
SIO COM1
SIO COM2
Select Port for console redirection. Note: the respective
port has to be enabled in setup!
- Terminal Type ANSI
VT100
VT100+
UTF8
Set terminal type of UCR
- Baudrate 9600
19200
38400
57600
115200
Set terminal type of UCR
- Flow Control None Set flow control method for UCR. None = No flow
79