Kontron PCI-761 - Manual (Page 44)

12. AMI BIOS Utility PCI 761 – User’s Guide (V1.01)
42 www.kontron.com
12.4.3. SuperIO Configuration
You can use this screen to select options for the SuperIO Configuration, and change the value of the selected option. A
description of the selected item appears on the right side of the screen.
¾ Serial Port1 Address
This option specifies the base I/O port address and Interrupt Request address of serial port 1. The Optimal
setting is 3F8/IRQ4. The Fail-Safe default setting is Disabled.
¾ Serial Port2 Address
This option specifies the base I/O port address and Interrupt Request address of serial port 2. The Optimal
setting is 2F8/IRQ3. The Fail-Safe setting is Disabled.
¾ Parallel Port Address
This item allows you to determine the I/O address for onboard parallel port. There are several options for
your selection.
z Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port.
z Parallel Port IRQ
Use this item to set up the IRQ for onboard parallel port.
¾ Serial Port3 Address
This item specifies the base I/O port address and Interrupt Request address of serial port 3. The Optimal
setting is 3E8/IRQ11. The Fail-Safe default setting is Disabled.
¾ Serial Port3 IRQ
This item specifies the IRQ used by the serial port 3.
¾ Serial Port4 Address
This item specifies the base I/O port address and Interrupt Request address of serial port 4. The Optimal
setting is 2E8/IRQ10. The Fail-Safe default setting is Disabled.
¾ Serial Port4 IRQ
This item specifies the IRQ used by the serial port 4.