Kontron PCI-761 - Manual (Page 26)

9. Jumpers and Connectors PCI 761 – User’s Guide (V1.01)
24 www.kontron.com
9.4.9. Floppy Disk Port Connector (CN4)
The board provides a 34-pin header type connector, CN4, supporting up to two floppy drives. The floppy drives may be any
one of the following types: 5.25" 360KB/1.2MB and 3.5" 720KB/1.44MB/2.88MB.
Pin Signal Pin Signal Pin Signal
1 GND 2 Drive Density Select 3 GND
4 No connector 5 GND 6 No connector
7 GND 8 Index# 9 GND
10 Motor enable A# 11 GND 12 No connector
13 GND 14 Drive select A# 15 GND
16 No connector 17 GND 18 Direction#
19 GND 20 STEP# 21 GND
22 Write data# 23 GND 24 Write gate#
25 GND 26 Track 0 # 27 GND
28 Write protect# 29 No connector 30 Read data#
31 GND 32 Head selection# 33 No connector
34 Disk change#
9.4.10. Intel® HD Audio Digital Header (CN1)
Pin Signal Pin Signal
1 MIC IN 2 GND
3 LINE IN L 4 GND
5 LINE IN R 6 GND
7 LINE OUT L 8 GND
9 LINE OUT R 10 GND
9.4.11. PS/2 Keyboard, Mouse Connectors (CN28, CN29)
The board provides the Mouse (CN28)/ Keyboard (CN29) interface with a 5-pin connector.
Pin Signal
1 Clock
2 DATA
3 No
connector
4 GND
5 +5V