Parallel port connector (cn7) – Kontron PCI-761 User Manual
Page 28
9. Jumpers and Connectors
PCI 761 – User’s Guide (V1.01)
26
www.kontron.com
9.4.13. Parallel Port Connector (CN7)
This board has a multi-mode parallel port to support:
1. Standard Mode:
IBM PC/XT, PC/AT and PS/2™ are compatible with bi-directional parallel port.
2. Enhanced Mode:
Enhance parallel port (EPP) is compatible with EPP 1.7 and EPP 1.9 (IEEE 1284 compliant).
3. High Speed Mode:
Microsoft and Hewlett Packard extended capabilities port (ECP) is IEEE 1284 compliant.
Pin
Signal
Pin
Signal
1
Strobe#
2
Auto Form Feed#
3 Data
0 4 Error#
5 Data
1 6
Initialize#
7
Data 2
8
Printer Select In#
9 Data
3 10
GND
11 Data
4 12
GND
13 Data
5 14
GND
15 Data
6 16
GND
17 Data
7 18
GND
19 Acknowledge# 20
GND
21 Busy 22
GND
23 Paper
Empty# 24
GND
25 Printer
Select 26
GND
9.4.14. SATA Connectors (CN11, CN12, CN13, CN16, CN17, CN18)
These SATA connectors are for high-speed SATA interface ports and they can be connected to hard disk devices.
Pin
Signal
1 GND
2 SATA_TX+
3 SATA_TX-
4 GND
5 SATA_RX-
6 SATA_RX+
7 GND