Kontron AM4022 uEFI BIOS - Manual (Page 66)

The uEFI Shell AM4022 uEFI BIOS
Page 60 ID 1052-1333, Rev. 1.0
6.2.11 ksettings uEFI Shell Command
ksettings
FUNCTION: Verify the validity of the setup settings
SYNTAX:
kSettings [-?|-s|-c] []
where:
-? show help
-s Save current setup settings to “file”
-c Compare current setup settings to “file”
“file” to be used for saving or comparison
DESCRIPTION: The ksettings command is used to create a binary file of the current
setup settings. This file can later be used to check whether the settings
have changed or not.
To use this command a device with a FAT file system is required to be
connected.
USAGE: Save current setup settings
(assumes that FAT file system is mapped to fs0:)
COMMAND / RESPONSE
fs0:\> ksettings -s companyDefaults.bin
Reading flash content... done
Saving setup settings to file... done
Check whether current setup settings differ from “file”
COMMAND / RESPONSE
fs0:\> ksettings -c companyDefaults.bin
Reading flash content... done
Setup settings and file match