Kontron AM4530 - Manual (Page 38)

25 AM453x
www.kontron.com
4.4.10.1 Setting-up a Static IP Address
Set the correct values for the 'IPADDR' and 'NETMASK' variables in the /etc/ifcfg-eth0 file and make sure
'BOOTPROTO' is set to 'static'.
DEVICE=eth0
IPADDR=192.168.100.10
NETMASK=255.255.255.0
BOOTPROTO=static
ONBOOT=yes
4.4.10.2 Setting-up TFTP Server
1 Mount a HDD folder to /tftpboot.
# mkdir /mnt/disk/
# mount /dev/sda1 /mnt/disk
# mount --bind /mnt/disk /tftpboot
Or use the following commands to make sure this is done automatically during boot.
# mkdir /mnt/disk/
# echo "/dev/sda1 /mnt/disk ext3 defaults 0 0" >> /etc/fstab
# echo "/mnt/disk /tftpboot none bind 0 0" >> /etc/fstab
2 Start the inet daemon.
# /etc/init.d/inet-daemon start
Or use the following commands to make sure this is done automatically during boot.
ln -sf /etc/init.d/inet-daemon /etc/rcS.d/S50inet-daemon
4.4.10.3 Setting-up Syslinux
1 Copy the file “pxelinux.0” into the TFTP server directory /tftpboot and copy any kernel or initrd images
that you want to boot in this directory.
2 Create the directory /tftpboot/pxelinux.cfg (and make it world readable).
# mkdir /tftpboot/pxelinux.cfg
3 Create a file "default" and then add the pxelinux configuration in/tftpboot/pxelinux.cfg/default:
prompt 1
default linux
timeout 100
label linux
kernel vmlinuz
append initrd=initrd.img [Add Linux kernel parameters]