Kontron KTQM67-mITX - Manual (Page 23)

KTQM67 Users Guide
KTD-N0819-K Page 23
The principal test system and test equipment used
1.
Tektronix TDS5104B
2. Tektronix TCPA300
3. Tektronix TCP312
4. Fluke 289
5. Fluke 179
6. ATX rail switch
Note: Power consumption of PSU (power loss), Monitor and HDD are not included.
The following six configurations (a – f) have been tested
a) Low Power Setup KTQM67/mITX ATX+12V PSU
b) Low Power Setup KTQM67/mITX +12V only PSU
Standard system configuration equipped with PCIex1 card, Internal graphics, 2x SATA disks, Intel i5
CPU, 1x SODIMM (1GB Modules), Monitor, Keyboard & Mouse. 1x 1-4GB USB Stick, 12V active
cooler (KT), PSU (Corsair 430W)
c) High Power Setup KTQM67/mITX ATX+12V PSU
d) High Power Setup KTQM67/mITX +12V only PSU
Standard system configuration equipped with PCIex1, PCIex16, miniPCIe WLAN, 4x SATA disks,
Intel i7 CPU, 2x SODIMM (1GB Modules), Monitor, Keyboard & Mouse, 4x 1-4GB USB Sticks, 12V
active cooler (KT), PSU (Corsair 430W).
e) Low Power Setup KTQM67/Flex
Standard system configuration equipped with PCIex1 card (network PLNA001), Internal graphics,
2x SATA disks, Intel i5 CPU, 1x SODIMM (1GB Modules), Monitor, Keyboard & Mouse. 1x 1-4GB
USB Stick, 12V active cooler (Intel Box), PSU (Fortron 400W)
f) High Power Setup KTQM67/Flex
Standard system configuration equipped with PCIex1 card (network PLNA001), PCIex16 (Graphics
PLGA004), 4x SATA disks, Intel i7 CPU, 4x SODIMM (1GB Modules), Monitor, Keyboard & Mouse.
4x 1-4GB USB Stick, 12V active cooler (Intel Box), PSU (FPGA PS5)
ATX supplies
KTQM67 PSU
Gnd
Current
Probe
Tektronix TDS5104B
System Specification