Product description, 1 product overview, 2 what’s included – Kontron RTM806x User Manual
Page 15: 3 board specifications, Table 1-1 board specifications
2
www.kontron.com
1. Product Description
1.1
Product Overview
The RTM806X is a single slot (6HP) AdvancedTCA Rear Transition Module. This RTM provides additional
connectivity and storage functionality to the AT8060 CPU front board.
1.2
What’s Included
This board is shipped with the following items:
• One RTM806X board
• Two Hard Disk Carriers with their respective HDD, already mounted on the RTM806X board.
• One CD-ROM containing documentations.
If any item is missing or damaged, contact the supplier.
1.3
Board Specifications
Table 1-1:Board Specifications
Features
Description
Compliancy
•
PICMG3.0 R3.0 (see note in section 1.4)
•
SAS1R10
•
SFF-8088
•
IEEE 802.3z (fiber interface)
•
PICMG HPM.1
•
USB 2.0
IPMI Features
•
Management Controller compliant to PICMG 3.0, IPMI v2.0 and AMC.0 R2.0.
•
Management Controller is run time field reprogrammable without payload impact.
•
Robust fail safe reprogramming implementation (which includes two firmware images) that
performs an automatic or manual rollback if a problem occurs during critical reprogramming
phase.
•
Remote upgrade capability (via IPMB).
•
Management Controller self test which can detect a failure in its code integrity and trigger an
automatic rollback.
Supervisory
•
Hardware system monitor(sensors, alarm, events) through IPMI (voltages, temperatures),
power failure.
Mechanical
•
350.93 X 176.8 X 28.95 mm
Power Requirements
•
10W Typical without hard drive.
•
65W Maximum with hard drives.