Kontron IPMI Firmware - Manual (Page 12)

D R A F T — F O R I N
T E R N A L U S E O N L Y
12 www.kontron.com
User Guide
IPMI Fimware
Example of board FRU ID: “STD_R10”
Example of product FRU ID: “STD_R10”
4.3 Board-Specif ic FRU Data
The following FRU data areas and data fields are provided:
FRU Board Info Area
» Manufacturing date / time
» Board manufacturer(C7): “Kontron”
» Board Product Name(C6): “CPxxxx” or “AMxxxx”
1)
» Board Serial Number(CF): “123456789012345”
1)
» Board Part Number(C9): “1234-5678” 1)
» FRU File ID(C7): “STD_R10”
1)
FRU Product Info Area
» Product manufacturer(C7): “Kontron”
» Product Name(C6): “CPxxxx” or “AMxxxx”
1)
» Product Part Number(C2): “00” 1)
» Product Version(D9): “0000000000000000000000000”
2)
» Product Serial Number(D9): “0000000000000000000000000”
2)
» Asset Tag(D9): “_________________________”
2)
» FRU File ID(C7): “STD_R10”
1)
» CustomData(D5): “MAC=CC:CC:CC:CC:CC:CC”
1)
1)
Example value / field will be modified during the manufacturing process.
2)
Field is free for user. Please note that changes need special care (checksums).
4.4 FRU Data Update
Typically, an update of the FRU data is not necessary because the board’s correct FRU data is installed
at the factory. If an update of the FRU data is required, it can be done via regular IPMI FRU device com-
mands. The correct FRU data must be prepared at the factory. Please contact Kontron for further assis-
tance.
4.5 E-Keying (AMC)
E-Keying has been defined in the AMC.0 R2.0 Specification to prevent module damage, prevent mal-
function, and verify bay connection compatibility. Therefore, the FRU data of an AMC module contains
PICMG-defined records which describe the module’s AMC interoperability:
» Module Current Requirements Record
» Clock Configuration Record, for the PCI Express reference clock and Telecom clocks
» AMC Point-to-point Record, describing module’s AMC port capabilities