Kontron IPMI Firmware - Manual (Page 10)

D R A F T — F O R I N
T E R N A L U S E O N L Y
10 www.kontron.com
User Guide
IPMI Fimware
To obtain detailed version information of the active IPMI firmware, use the following command:
To obtain the version of the rollback copy (only valid if a newly downloaded firmware is already acti-
vated), use the following command:
To obtain the version of the newly downloaded IPMI firmware (only valid after download and before
activation), use the following command:
To obtain detailed information about the IPMI HPM.1 upgrade capabilities, use the following com-
mand:
To perform a manual rollback to the previously good firmware image, use the following command:
3.1.4 Firmware Upgrade via “uEFI kIpmi hpm”
The new IPMI firmware must be available from the uEFI Shell using, for example, a USB flash drive. The
firmware upgrade procedure starts with downloading the HPM.1 file using, for example, the following
command:
After successful download, the new IPMI firmware is automatically activated. Information about the
currently active firmware versions of the rollback firmware version copies can be obtained using the
command:
Version information of the HPM.1 file can be obtained via the following command:
To perform a manual rollback to the previously good firmware image, use the following command:
ipmitool hpm compprop 1 1
ipmitool hpm compprop 1 3
ipmitool hpm compprop 1 4
ipmitool hpm targetcap
ipmitool hpm rollback
fs0:\> kIpmi hpm upgrade .hpm
fs0:\> kIpmi info
fs0:\> kIpmi hpm info .hpm
fs0:\> kIpmi hpm rollback