Kontron CP6004X-SA - Manual (Page 23)

CP6004X-SA Introduction
ID 1054-1227, Rev. 1.0 Page 1 - 5
D R A F T — F O R I N T E R N A L U S E O N L Y
1.3 System Expansion Capabilities
1.3.1 XMC Module
The CP6004X-SA has one XMC mezzanine interface for support of x1, x4 and x8 PCI Express
2.0 XMC modules providing an easy and flexible way to configure the CP6004X-SA for various
application requirements. For information on the XMC interface, refer to chapter 2.10.9, "XMC
Interface".
1.3.2 CP6004X-SA-MK2.5SATA Assembly Kit
The CP6004X-SA comes with an optional CP6004X-SA-MK2.5SATA assembly kit comprised
of one MMADP-SATA01 module and the necessary components needed for mounting the mod-
ule on the CP6004X-SA. The MMADP-SATA01 module is required for connecting an onboard
2.5" SATA HDD or SSD to the CP6004X-SA via an onboard SATA extension connector. For fur-
ther information concerning the MMADP-SATA01 module, please refer to Appendix A.
1.3.3 SATA Flash Module
The CP6004X-SA provides support for up to 64 GB NAND flash memory in combination with
an optional SATA Flash module, which is connected to the CP6004X-SA via an onboard SATA
extension connector. For further information concerning the SATA Flash module, please refer
to Appendix B.
1.3.4 Rear I/O Module
The CP6004X-SA provides support for one rear I/O module via the CompactPCI rear I/O con-
nectors. For further information about the compatibility of rear I/O modules with the CP6004X-
SA, please refer to the CP6004X-SA datasheet.
1.4 Board Diagrams
The following diagrams provide additional information concerning board functionality and
component layout.