Kontron CP6004X-SA - Manual (Page 21)

CP6004X-SA Introduction
ID 1054-1227, Rev. 1.0 Page 1 - 3
D R A F T — F O R I N T E R N A L U S E O N L Y
1. Introduction
1.1 Board Overview
The CP6004X-SA (Standard Air-Cooled) is a highly integrated 6U CompactPCI system
controller board based on the 3
rd generation Intel® Core™ i7 processor combined with the
mobile Intel® QM77 Express Chipset.
The board supports the Intel® Core™ i7-3615QE quad-core processor with 2.3 GHz built on 22-
nm technology and provided in a BGA package. The processor is soldered on the CP6004X-
SA which results in a higher Mean Time Between Failures (MTBF) and a significant improve-
ment in cooling.
Two SODIMM sockets are available on the CP6004X-SA to provide up to 16 GB dual-channel,
DDR3 memory with Error Checking and Correction (ECC) running at 1600 MHz. The graphics
controller and the memory controller are integrated in the processor. Furthermore, either one
2.5" HDD/SSD or up to 64 GB NAND flash memory (SSD) via a SATA Flash module can be
integrated onto the CP6004X-SA.
For maximum application flexibility, the CP6004X-SA comes with an extensive range of inter-
faces such as up to five Gigabit Ethernet ports (three on front I/O and two on rear I/O in com-
pliance with PICMG 2.16), three high-resolution graphics interfaces (VGA, 2 x HDMI/DVI), two
COM ports (RS-232 on front and rear I/O), and six SATA interfaces with RAID 0/1/5/10 func-
tionality, one for the onboard SATA connector, one for the SATA Flash module or the 2.5" HDD/
SSD, and four for rear I/O. In addition, six USB 2.0 ports are available on the board, two on
front I/O and four on rear I/O.
Support for one XMC module ensures individual system expansion via the XMC interface uti-
lizing a x8 lane PCI Express 2.0 interconnection.
The board supports a configurable 64-bit/66 MHz PCI or PCI-X hot swap CompactPCI inter-
face. When installed in the system slot, the interface is enabled, and when installed in a periph-
eral slot, the CP6004X-SA is isolated from the CompactPCI bus.
In addition, the CP6004X-SA provides support for high-speed serial rear I/O interconnection
via two 10GBASE-KR ports and one x4 PCI Express 2.0 port operating at up to 5 GT/s. In gen-
eral, the high-speed serial rear I/O interconnection is capable of supporting two 10GBASE-KR/
40GBASE-KR4 ports, one x8 PCI Express 3.0 port operating at 8 GT/s, and two SATA 6 Gb/s
ports. The mechanical implementation and the signal definition of the high-speed serial rear I/
O interconnection is compliant with the PICMG 2.20 specification. The CP6004X-SA is also
compliant with the PICMG 2.16 specification and provides support for Kontron’s latest 6U rear
transition modules. The CP6004X-SA has been designed for use in a Kontron CompactPCI
backplane based on the PICMG 2.20 and PICMG 2.16 specifications.
Safety and security features via a Trusted Platform Module (TPM) 1.2 are provided on request.
Intelligent Platform Management Interface (IPMI) is supported as well.
Designed for stability, the board fits into applications situated in industrial environments, includ-
ing I/O intensive applications where only one slot is available for the CPU, making it a perfect
core technology for long-life applications. Components with high temperature tolerance have
been selected from embedded technology programs, and therefore offer long-term availability.
The board is offered with various Board Support Packages including Windows, VxWorks and
Linux operating systems. For further information concerning the operating systems available for
the CP6004X-SA, please contact Kontron.